詳細配置：
罐體有效容積20立方
介質：無水氨
單位充裝量530千克/立方米
設計壓力2.17Mpa
材質：Q345R
封頭厚度：18mm正圓形
筒體厚度：18mm
Detailed configuration:
The effective volume of the tank is 20 cubic meters
Medium: anhydrous ammonia
Unit filling capacity: 530 kg/m3
Design pressure: 2.17 MPa
Material: Q345R
Head thickness: 18mm, perfectly round
Thickness of the cylinder: 18mm
其他配置：
單出液，有氣相口、液相口、安全閥、溫度計、壓力表、液位計，鋁合金擋泥板，不銹鋼操作箱和工具箱，左右側防護鋁合金，罐體尾部可選裝爬梯，罐體兩側可選加裝炮筒（費用另計），其它按國家壓力容器標準設計。
Other configurations:
It is a single-outlet tank, equipped with a gas phase port, liquid phase port, safety valve, thermometer, pressure gauge, and liquid level gauge. It features an aluminum alloy fender, stainless steel operation box and toolbox, aluminum alloy protection on both sides, and an optional ladder at the rear of the tank body. Optional gun barrels can be added on both sides of the tank body (at additional cost). Other designs comply with national pressure vessel standards.
加氣設備部分：
標配國產流量計（可選裝加氣機），國產液化氣泵，液壓馬達，液壓油散熱器，安全回流閥，管道安全閥，管道壓力表，溫度計，輪式操作器，減震軟管，止回閥，加氣卷盤，10米加氣軟管。加氣設備閥門箱可選擇安裝在車輛側邊或者后尾部。
Gas filling equipment section:
Standard configuration includes domestic flowmeter (optional gas dispenser), domestic liquefied gas pump, hydraulic motor, hydraulic oil radiator, safety reflux valve, pipeline safety valve, pipeline pressure gauge, thermometer, wheel operator, shock absorber hose, check valve, gas filling reel, and 10 meter gas filling hose. The valve box of the refueling equipment can be installed on the side or rear of the vehicle.
